Get the Best price and THREE FREE 10mL BOTTLES!

- Stainless Steel Body
- 1 Power button
- 1 Voltage up button
- 1 Voltage down button
- 1 Activation button
- 1 LCD screen, which shows the current voltage the device is set on
- 1 Vented removable end cap with spring for battery tension
- Uses 1 - 18650 flat top high drain battery

Kit Contents:

1 x Gift Box

Plus free 30ml bottle VapeDudes e-Juice of your choice.

LavaDude Body Dimension 125mm (L) x 22mm (D)

Technical Specs:

• Selectable voltage from 3v to 6v in 0.1v increments.
• Power on/off button - Hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.
• + Button: On press, increases voltage by 0.1 increments between 3v and 6v. When you reach 6v, the user starts back at 3v.
• - Button: On press, decreases voltage by 0.1 increments between 3v and 6v. When you reach 3v, the user starts back at 6v.
• + and - Button: Press and hold both buttons for 5 seconds to disable the + and - button, locking the device on the voltage it is currently set at.
• Regulated output which keeps the voltage the same with each puff - regardless of the remaining battery power. As the battery drains, the device will keep the voltage consistent.
• If the power button is held down for 10 seconds or longer, the LavaDude VV will shut itself off until the button is released. To prevent overheating the Atomizer and the device.
• Short Circuit/Atomizer Protection. The LavaDude VV can recognize an Atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and Atomizer. If the Atomizer is too low or shorted out it will shut off power to the device to protect the LavaDude VV from being damaged.
• Reverse Battery Protection - Protects the device in case you put the battery in the device backwards.
• Battery Monitoring/Over-Discharge Protection - The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it.
• Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.
• Amperage Limiting to 3.2 amps - The device should monitor and shut itself off if it detects any excessive over-current conditions.
• Vent hole on the bottom of the device for added safety.

Show your Vape Dudes Pride!

Replacement Glass tanks for your Cobra - The 3ml and 5ml are not interchangeable so make sure you are buying the correct replacement glass.

3ml - Length 28mm

5ml - Length 38mm

Vape Dudes Present the EA (Electric Angel) Mechanical Telescopic Mod

The EA Mod, from Finland, has been designed and precision engineered using a 3D computer aided design and manufacture process. All of the components are machined using stainless steel and brass. This technique ensures a perfect fit of all the components. Thus, the endurance and reliability of the device is unparalleled. The color available for the moment is “mist”.

This kit includes the CE3 atomizers with pen style cap!

- Black Chrome Body
- 1 Power button
- 1 Voltage up button
- 1 Voltage down button
- 1 Activation button
- 1 LCD screen, which shows the current voltage the device is set on
- 1 Vented removable end cap with spring for battery tension
- Uses 1 - 18650 flat top high drain battery

Kit Contents:

1 x Gift Box

Plus free 30ml bottle VapeDudes e-Juice of your choice.

LavaDude Body Dimension 125mm (L) x 22mm (D)

Technical Specs:

• Selectable voltage from 3v to 6v in 0.1v increments.
• Power on/off button - Hold the button down for 5 seconds to turn the device on, hold the button again for 5 seconds to turn the device off.
• + Button: On press, increases voltage by 0.1 increments between 3v and 6v. When you reach 6v, the user starts back at 3v.
• - Button: On press, decreases voltage by 0.1 increments between 3v and 6v. When you reach 3v, the user starts back at 6v.
• + and - Button: Press and hold both buttons for 5 seconds to disable the + and - button, locking the device on the voltage it is currently set at.
• Regulated output which keeps the voltage the same with each puff - regardless of the remaining battery power. As the battery drains, the device will keep the voltage consistent.
• If the power button is held down for 10 seconds or longer, the LavaDude VV will shut itself off until the button is released. To prevent overheating the Atomizer and the device.
• Short Circuit/Atomizer Protection. The LavaDude VV can recognize an Atomizer with too low of a resistance for the current voltage setting and will drop the voltage to 3.7v to protect both the battery and Atomizer. If the Atomizer is too low or shorted out it will shut off power to the device to protect the LavaDude VV from being damaged.
• Reverse Battery Protection - Protects the device in case you put the battery in the device backwards.
• Battery Monitoring/Over-Discharge Protection - The device will monitor the battery voltage and automatically turn off when the battery is discharged, preventing damage to the battery by overly depleting it.
• Regulated output which keeps the voltage the same with each puff - regardless of your remaining battery power. As the battery drains, the device will keep the voltage consistent.
• Amperage Limiting to 4.0 amps - The device should monitor and shut itself off if it detects any excessive over-current conditions.
• Vent hole on the bottom of the device for added safety.

Vape Dudes - Tesla Kit

Variable Voltage /Wattage Device

w/ 30ml bottle of juice

• 1.1 Power Reset
• When the OLED screen shows “Tesla,” The unit will boot into standby after 2 seconds.
• 1.2 Cut-off Protection
• Activating the unit for longer than 10 seconds will trigger this safety feature, and the power output of the Tesla will cut off until the next button push.
• 1.3 Low battery detection
• When the battery cell is depleted, or needs to be charged or changed, the unit will display the code “Low V.” The unit will cease to output until a charged battery is installed.
• 1.4 OLED display
• When the OLED is set to display during use, it will show the corresponding information it has been set to display. If the OLED is not displaying any information, the screen has been turned off.

Tesla Function and Features

1. Constant voltage and Constant power (dual mode output)

In constant voltage mode, the output voltage can be adjusted between 3.0-6.0V in increments of 0.1V.

In constant power mode, the output power can be adjusted between 3.0W and 15.W in 0.5W increments.

2. Single cell 3.7V battery input operational voltage is 3.2-5.0V

3. button adjustments allow you to choose between 25 possible power settings, and 31 possible voltage settings.

4. Atomizer resistances check function which can test and display the resistance of the atomizer in OHMS.

5. OLED display, which can show the battery input and output voltage, atomizer resistance, output power, or short circuit warnings.

6. Short circuit protection, and reverse battery installation protection.

If the battery is installed backwards, the control panel will switch to protected mode, so as to not damage the internal components of the Tesla.

7. Low voltage warning, will stop use of under-charged batteries and display the “Low V” warning.

8. Short circuit and Unsafe Amperage protections: The Tesla should detect external short circuits and disengage to protect the user.

The tesla will also detect if the attached atomizers resistance is too low to safely draw current.

In both cases the Tesla will disengage output automatically.

Kit includes:

2 x 18650(2200mAh) batteries

1 x 1DCT w/2 cartos

1 x 18650charger

1 x Gift Box

1 x User manual

Works with Texas Tuff Tanks! (without adapter)

Each Tesla comes with a 30ml of Vape Dudes eJuice!